Description
Used, undamaged 77.9mm, 6 rib Stage 2 GM supercharger pulley. fits LSJ Ecotec M62 Supercharger. Requires new calibration to be downloaded to ECM by GM dealer and a set of 5.3 grams per second fuel injectors.
CARB Certified: D-126-10
Also fits other vehicles that use a press fit pulley. Dual offset. 10mm from front shaft face to bottom of 1st v groove. Opposite side is 0mm

Intercooler Air Bleeder
Rear rotor plate G1 and G2
JB Performance Supercharger Oil with Stage 3 Technology 8 ounce bottle.
JB Performance billet impeller wheel CW, Paxton Novi 1000 Supercharger
Front entry drive pass thru needle bearing 17mm x 27.5mm x 23.4mm
Bypass mounting bolts
Powerdyne mounting bolts
Vortech, Paxton steel replacement oil injector 8R100-002
Lysholm, Whipple Rear Needle Bearing Sleeve Shoulder Bolt, Short Shaft
Whipple Supercharger oil 155ml 1.6L (100AX, 1600AX, 1600AR), 2.3L (140AX, W3A, 2300AR, 2300R, 2300AX, 2300AXM, 2300AXO), 175AX 2.9L, 235RF 3.8L
Rotor retaining ring clip for Kenne Bell or HPS
Replacement front case bolt for G3 and older 